CHOOSE Technology; Petrochemical Oil Analyzer & Instrument

Headquartered in Danbury, Connecticut, A2 Technologies is taking FT-IR spectroscopy out of the lab and into the field. A2 Technologies manufacture and develop portable FT-IR spectrometers designed for the analytical needs of the petrochemical, environmental, metals and mining and general environments where there is a need for analysis. The portable FT-IR analyzers extend the proven capabilities of Fourier Transform infrared technology by rendering sample preparation obsolete and ensuring real time results.

In 2007, A2 Technologies introduced the ML spectrometer series - small, rugged FTIR spectrometers for monitoring the condition of lubricating fluids in high value machinery at the sample site. Recently we announced Exoscan, the world’s first high performance, hand-held FTIR analyzer. Exoscan is a powerful, non-destructive testing device for surface analysis of composites and metals used in aircraft and aerospace manufacturing, as well as for other industries.

A2 Technologies

PAL/iPAL

Powerful Technology for On-Site Oil Analysis

The PAL (Portable Analyzer for Lubrication) is an extremely small mid-IR fingerprint region spectrometer specifically designed for on-site oil analysis.

The PAL was designed to give the user the capabilities of a much larger, laboratory FTIR system without the complexity, maintenance requirements or cost . The software is designed to provide immediate answers to the user without the need to understand infrared spectroscopy. With the touch of a button, the PAL system provides valuable information about the condition of a lubricating fluid. This allows the user to make quick decisions in the field and then make an immediate assessment of the remediation step.

A One Minute PAL Analysis Yields:

• Water - monitor for intrusion at very low levels

• Oxidation - Measure oxidation and nitration by-product formation as they occur

• Additive Depletion - accurately determine critical additive levels such as anti-oxidant, anti-wear and extreme pressure additives

• Contamination - ensure the proper lubrication has been shipped to you and that it is fit for service before accepting delivery.

Simple to Use - Minimal Training Required

With the PAL’s innovative sampling interface, no sample preparation is required and only 2 drops of sample is needed for analysis. The analysis take less than 2 minutes and cleanup takes seconds. Because the PAL’s software and user interface are intuitive, no technical training is required to use the system. Screen prompts assist the user in performing an analysis and the results are presented in an easy-to understand format.

ML/MLp

The MicroLab (ML) is available with a variety of sample interfaces for enhanced sensitivity and to improve quantitative results. Single and multi-reflection disks have been engineered using a patented diamond and ZnSe composite. Diamond is the world’s most durable substance and a ZnSe substrate is used for maximum IR signal.

The MicroLab (ML) is an extremely small mid-IR fingerprint region spectrometer specifically designed for sample analysis in challenging, multi-user environments. The heart of the system is a patented, rugged interferometer field proven to be used in any environment. The ML was designed to give the user ultimate flexibility in where to use the system whether it’s a traditional analytical lab, a temporary field lab or even in the field.

The ML was designed to give the user the capabilities of much larger, traditional FTIR benches in a significantly more compact size. It is simple to use and will analyze an exceptionally broad range of liquids, powders, pastes and gels. With the touch of a button, the ML provides valuable information about the identity and amount of chemical substances present in a material.

The ML Will:

• Monitor the quality of products

• Determine ingredients in a mixture are at the proper levels

• Assess quality of incoming raw materials

• Identify contaminants

• Monitor the mixing, blending or curing process

• Track the decomposition of key additives in a blend

Simple to Use - Minimal Training Required

With the ML’s innovative sampling interface, no sample preparation is required, measurements take less than 2 minutes and cleanup takes seconds. Because the ML’s software and user interface are intuitive, no technical spectroscopy training is required to use the system.

OSA

EXOSCAN

The Exoscan™ is a portable, handheld, battery operated FTIR analyzer designed to measure a wide variety of solid and liquid samples. Weighing approximately 7 pounds including the data system and batteries, Exoscan is designed for both in lab and out-of-lab use.

Exoscan Features:

• Highly rugged, miniaturized modulator with large diameter optics and very fast, short internal optical path which provides performance equal to or better than conventional laboratory FTIR spectrometers.

• Interchangeable ATR and external reflectance sample interfaces.

• PDA based control panel that wirelessly links to a laptop for upload and download of data, methods etc.

• Onboard, rechargeable lithium ion battery that permits more than 3 hrs. of continuous operation.

• Multi-level software and user interfaces, permitting personnel with different job requirements to successfully use Exoscan.

• Docking station that will allow the Exoscan to be used in a lab just like a benchtop FTIR.

Exoscan Applications

Composites Production
and Degradation
1) Chemical Degradation
2) Pre-Preg Health and Aging
3) Degree of Cure

Metal Coatings
1) Identifying Type and Effectiveness of Anodization Treatment
2) Paint and Primer ID, Homogeneity and Thickness
3) Detection of Surface Oxide Layers on Metal

Surface Preparation
1) Bonding Adhesive ID, Homogeneity and Thickness
2) Primer Percent of Hydration Adhesive and Metal Surfaces
3) Surface Cleanliness in Bonding Applications
4) Surface Preparation of Metal
5) Detection of Surface Oxide Layers on Metal